Subscribe
 


Genaral Computer Design Software

Google
Electronics Infoline Web





UMPS Demo Rev. 1.75D - I

UMPS Demo Rev. 1.75D - I

http://margo.student.utwente.nl/el/micros/more/umps/umps_d1.zip

UMPS Demo Rev. 1.75D - II

UMPS Demo Rev. 1.75D - II

http://margo.student.utwente.nl/el/micros/more/umps/umps_d2.zip

Converts IBM BASIC to '51 assembly

Converts IBM BASIC to '51 assembly

http://margo.student.utwente.nl/el/micros/80xx/bas051.zip

sparcdis.nw

sparcdis.nw

Disassembler for the SPARC instruction set; by Cristina Cifuentes, Norman Ramsey.

http://www.eecs.harvard.edu/~nr/toolkit/examples/sparc/sparcdis.html

BASIC-52 for 8031/8051 in external EPROM

BASIC-52 for 8031/8051 in external EPROM

http://margo.student.utwente.nl/el/micros/80xx/basic31.zip

Bootstrap program

Bootstrap program

to read an Intel hex file from a PC serial port, dump it into RAM, then run it.

http://margo.student.utwente.nl/el/micros/80xx/boot8051.zip

C source codes for accessing the IBM LPT port

C source codes for accessing the IBM LPT port

http://margo.student.utwente.nl/el/ports/pc/par_port.zip

TX/RX RS232C

TX/RX RS232C

procedures to send and receive data in a RS232C compatible format using PIC 12C5XX microcontroller, used protocol is 8N1 (8 data bits,no parity bit, 1 stop bit) and the baud rate is 300bps

http://fumil.freeservers.com/rxtx-en.htm


Pages: [1] 2 3 4 5 Next Page >>