In this instructable I will show you how to make your own tremolo effects pedal. Really what the pedal is doing is switching the guitar's signal on and off sequentially, making that cool effect that we have heard in so many songs to date. For this project you should have a basic idea of soldering and circuits.
To View All Steps on one page,
Go Pro Today!
step 1Materials
As far as tools go you will need:1.) Soldering Iron2.) Solder- Make sure that you have rosin core solder, acid core does not work on electronics.3.) Multimeter (Optional, b…
step 2The Schematic
This schematic provides the bones of the circuit, but feel free to modify it to your hearts content! R1 controls the volume of the input signal, and R2 controls the rate of…
step 3Building The Circuit
Before you actually solder, you should test the circuit on a breadboard. What I did was break the circuit down into chunks and test each one (the timer, the transistor, and…
step 4Thank's For Viewing!
I hope this project was of use to you, again if you have any questions, feel free to comment.
Related Videos
http://www.instructables.com/id/Make-Your-Own-Tremolo-Effects-Pedal/