This Instructable will show you how to make the ultimate pocket sized tool. It can charge your ipod, Zune, phone, GPS or anything that runs off of a USB port. Its a flash light, and a TV Remote jammer, who doesn't want one of those right?
step 1Step one, what you will need
Before you start, make sure you have everything needed on this list! 1. Altoids tin, $2.69 2. a cheap infrared Laser pointer from Walmart, should have a flash light built …
step 2take apart and ready the tv remote jammer!
Okay, so this step is relatively simple, all you have to do, is take off a screw located on the back of the jammer, that holds in the batteries. then take out the batteries…
step 3Ready the flash light
This part is actually the hardest part... First take out the batteries , then you need to take your dremel tool, and cut the laser pointer in half. the put the remaining ha…
step 4Adding the minty boost 2.0
I used the Minty boost 2.0, because it was the newest, and says it works best with my ipod nano 4th gen, but you can use any version with this. Okay make sure you went to …
step 5Preparing the tin
okay, so now take your drill, and drill a 3-4mm hold in the middle of the lid on the tin on the shorter side of the tin lid. Then take your TV Jammer and place a bead of h…
step 6Adding the electronics
Okay, so you should have already added your tv jammer, so now put your switch through it's hole,, remove, the nut, and the washer, and stick the switch through the hole fro…
step 7You're Done!
Add your AAA batteries, and enjoy, the flash light will light your way, your ipod will be charged, and you can now annoy your dad, when he starts channel surfing!
step 8Video Proof it works
step 9