A few days ago i bought some battery holder from a radio shack. I glued them to my device, soldered the Pins. After very short time i realized the poor quality of the holders.
Via Instructables | Posted on 2009.06.25 at 13:29
Welcome! I will show you how to make a solar usb charger that out puts about 6v and is perfect for charging anthing that uses USB. This is perfect for someone new to soldering! Here is the finished product:
step 1PartsYou need the following: 1x USB extension a/a cable http:www.
Via Instructables | Posted on 2009.06.24 at 19:48
This is the Sigma BC 2006 cyclometer. The wheel sensor is wireless. The main unit, the wheel sensor, and the heart monitor strap each use a CR2032 battery.
Via Instructables | Posted on 2009.06.22 at 23:53
Ever need something to hold some small batteries for a project you're working on? Here's how I modified an N type battery holder to accommodate a few of those coin cell batteries.
Via Instructables | Posted on 2009.06.18 at 22:37
Caution Lithium Ion battery has a high density and I will not be responsible for any damage or injury. Only use lithium ion battery charger that is compatible with the battery This is a simple battery mod to achieve longer run time.
Via Instructables | Posted on 2009.06.15 at 14:09
This Instructable will show one how to build a LED flashlight without solder that will lay flat for under $10. The idea for this came from a need to have a flat flashlight that would not roll around when I was working on computers and wiring for my tech support business.
Via Instructables | Posted on 2009.06.13 at 22:04
Creating a solar-powered, no running cost, algae bioreactor. step 1Finished bioreactorI apologize for not getting any pictures during construction of my solar-powered algae bioreactor, but I only decided to make an instructable out of it after the fact.
Via Instructables | Posted on 2009.06.13 at 20:39
This instructable will tell you how I went about building a 12v Solar setup to run my Air Cooler during our hot Summer and a 12v 120 litre Fridge/Freezer during the cooler months.
Via Instructables | Posted on 2009.06.12 at 00:58
I got bored last weekend and bought a couple of cheap solar garden lights from the pound shop having taken them apart i then used some of the parts to make a small charger for my mp3 players aaa battery.
Via Instructables | Posted on 2009.06.11 at 17:28
My mac book is working fine, but the battery will not change and the power meter, on the battery, don't work. step 1What the problem could beI wanted to check if the battery was really dead.
Via Instructables | Posted on 2009.06.08 at 00:07