The Universal solar charger

This is the best green gadget for charging your stuff. It even has a flash light.

To View All Steps on one page,

Go Pro Today!

step 1what you will need

1 project box (plastic is recommend),1 led (),1 4 AA battery pack, 4 AA rechargable batteries, 1 male 1/8 phone jack, as many female 1/8 phone jacks, 2 solar cells, 1 indic…

step 2cut the holes

Cut put and drill the holes that you will need to have the wires from your solar panles,  leds, jack, and your switches. Follow th digram or watch the video on the intro.

step 3Wireing the solar panles

to set up your solar panels, just follow this diagram or watch the video. if the palnes start to heat up, switch the diode around. ignore the middle diode.

step 4the guts

To set up the inside of this, just follow the diagram.

step 5Making the Power Plug.

Follow the Diagram or video.

step 6LAst Part

At the end of this. All you need to do is to make your holes in your case, aply your glue and your done.

Go to the above webpage for full Article or Back to Power and Energy