Subscribe
 

Newest Projects from your Favorite Blogs

Newest Projects automatically updated every Fifteen minutes.
Google
Electronics Infoline Web





DIY Electronic Fish Feeder

DIY Electronic Fish Feeder

  In this DIY Electronic Fish Feeder an Arduino microcontroller is used to spin a drill bit which is placed to work as an auger to meter out fish food.

Published: October 30th, 2014

Classic NES played using a Kinect

Classic NES played using a Kinect

  Tired of using a pesky remote control to play your video games? Paul DeCarlo used a Kinect sensor and some other bits and pieces to allow you to interface with some old video games! Ingredients: An NES console with game to test An NES controller OR some wiring skills and a CD4021BE 8-bit shift register 12 strands of wire, recommend Kynar 8 1k resistors (technically any value from 1k to 50k should suffice) 2 3.

Published: October 26th, 2014

Capacitive Fluid Level Sensor

Capacitive Fluid Level Sensor

If you need to determine the level of fluid you might think of some type of float switch system like what is typically used in a sump pit or a toilet tank.

Published: October 23rd, 2014

Free Fun Flexible Watch

Free Fun Flexible Watch

    Check out the F*watch! It is a Free Fun Flexible Watch design by a team of 15 people with various backgrounds, the watch is a challenging project since in the end it cant be the size of a lunch box, cant weigh a pound and cant be plugged into the wall for power.

Published: October 23rd, 2014

Can Crusher Project Build

Can Crusher Project Build

If you need to crush a bunch of aluminum cans you might as well build a machine to do it. That is what we see on the Ben Heck Show here. After Ben bent through a bunch of design submissions a cool design was selected.

Published: October 23rd, 2014

blueShift  An OpenXC LED Tachometer

blueShift An OpenXC LED Tachometer

Inside the custom 3D printed housing Pete Mills built a LED Tachometer which gets engine data from a Open XC ODB2 module via bluetooth. It is looking for RPM and headlight status data from the module to update the user display.

Published: October 17th, 2014

DIY LM1876 Audio Amplifier Project

DIY LM1876 Audio Amplifier Project

Our friends over at Electro Labs has a new project out, it is a DIY LM1876 Audio Amplifier Project. As usual it is a start to finish project that has full details so you can build your own.

Published: October 17th, 2014

U.S. Navy Autonomous Swarm Robot Boat

U.S. Navy Autonomous Swarm Robot Boat

The U. S. Navy is developing Autonomous Swarm Robot Boats. These boats are outfitted with Control Architecture for Robotic Agent Command and Sensing (CARACaS), this technology was developed by NASA for the Mars rover.

Published: October 12th, 2014

Robo-Dog made from Scrap Electronics

Robo-Dog made from Scrap Electronics

At a glance this Robo Dog by M. C. Langer looks like something you might find in the toy section of your local department store. Check out the parts below that went into the building of it.

Published: October 10th, 2014

Plot Clock

Plot Clock

This is a cool plot clock made by Francisco Ramos Mu?oz. It uses 3 mini servo motors, one to move the draw/erase mechanism up and down and two to move the print location.

Published: October 10th, 2014


1  2  3  4  5  6  7  8  9  10  11  Next >>