If you are looking to get into 3D printing have a look at this DeltaMaker A Delta Robot 3D Printer. Their Kickstarter was successful so it will just be a matter of time until these units are rolling off the production floor!
Via: Make
Product Hightlights:
Fused Filament Fabrication (FFF) using 1.
Published: April 7th, 2013
Remember the cheap automatic pick and place machine we told you about in December of last year? Ian from Dangerous Prototypes has purchased one and has been doing some testing on it.
Published: April 7th, 2013
Felipe La Rotta from Cocodrilabs had a noisy hamster wheel. Hamster wheels like most other mass produced pet items are made as cheap as possible, that means that you wont find a smooth spinning bearing in your hamster wheel.
Published: April 7th, 2013
We have featured Matt Dentons hexapod designs in the past. He has been spending some time working on a project that is a bit bigger than the previous ones! His new design which has been 4 years in the making called Mantis is a Hexapod Walking Machine.
Published: April 7th, 2013
Patrick Flanagan who we saw a few years ago has just released an album, you can get The Human Element by Zazari for free here. To see what other cool things Patrick is doing be sure to check out his blog.
Published: April 7th, 2013
Kerry Wong just finished his latest project, it is an Ethernet Temperature and Humidity Logger. I used an ENC28J60 Ethernet module along with an ATmega328p microcontroller to log the temperature and humidity readings and then process the data on my web server for display.
Published: April 7th, 2013
Thanks to lyberty5 for sending in his audio headset built from a SuperNES controller. The controller was used as a base, I then rebuilt walls with bits of plastic and epoxy resin.
Published: April 7th, 2013
Sammer has noticed about his latest project called liquid supply system. You can see a good example of such device when filling petroleum. It pours exact amount of it.
Published: April 5th, 2013
ATmega16 microcontroller is limited by RAM which is 1K. For a decent embedded webserver this is very little. But it seems to be possible as Andrew project shows.
Published: April 5th, 2013
A good lighting is essential when inspecting things through microscope. Built in light sources might not always be the best solution. It practically depends on what things are you looking at.
Published: April 5th, 2013