Make an indoor boomerang that actually comes back. I recently bought a three winged boomerang, it is the only boomerang that I have boughten that actually comes back. When I showed it to my friends they all wanted one, but there isn't any stores around here that sell them. I decided to make them copies that work. If you have all the parts this can be a great day project for all ages. This boomerang is safe to use in the house because it is made of styrofoam. The final boomerang will weigh only 0.3 ounces (six grams). This boomerang will only go out about eight to ten feet and come back. Use this in a large room with no air movement. If you use this outside make sure there is very little wind. I like to use mine outside best. You will have to move about a step or two to catch. As the video will show. This will not come back 100% of the time.
To View All Steps on one page,
Go Pro Today!
step 1Materials
The materials are very simple, and there isn't much to get. All that you need to get is: 1-) 1 roll of aluminum duct tape (weight), normal duct tape will work, but still…
step 2Cutting the fan-fold
Trace the pattern on to the fan-fold from the materials pictures. Cut the fan-fold using the pattern. To cut the fan-fold I used an utility knife. This is probably the ea…
step 3Weight
This is where the aluminum duct tape comes in. To put the tape on I cut the tape about 2 3/4 inches long, then I cut it into fourths. I took three of the fourths and put on…
step 4Weighing
Now you need to weigh the boomerang, if its not 6 grams (or 0.3 ounces) then add more tape in the same way as step 3 until you get desired weight. Most likely when you firs…
step 5Throwing
If you have followed the step correctly, you are done. If you are right handed hold it with your right hand, the side with tape (front) should be facing to your left. If …
Related Videos
http://www.instructables.com/id/Make-an-indoor-boomerang/