Subscribe
 


DIY KT88 + 6SN7 push-pull Amp



DIY KT88 + 6SN7 push-pull Amp
Related Videos

The main difference between single-end and push-pull, is distortion. In fact, SE produce a lot of harmonics, so a lot of distortion. Beside this is a bad idea for a power amp, this is really what a lot of people call a real tube sound.

The main issue right now, is that push-pull are a lot of more complicated. I mean you can build a simple SE with only a spare components.. this is not the case of a push-pull. For a single channel, I need 2 tubes, 1 bias power-supply, a highly regulated power supply and a phase shifter ..

For the tubes, I decided to use some KT88. In fact, a friend give me a spare matched quad of NOS (plain old) Gold Lion tubes + the needed output transformers so .. This tube are really great for the HIFI. And they look really great.

For the input stage, I decided to do something not really common. In fact most tube amps use some ECC82 / ECC83 for the input stage. My choice is something little different cause, I want to use some bigger tube. A lot of people say the 6SN7 (or 12SN7) are great for this stuff too. And some high quality power amps tube this, so why not. After looking for a while for a good schematic, and tested severalls stuff, here the one I gonna build:

In the comming (soon I hope), I will describe the schem and the modification I made. Right now, Iím waiting for the power transformer (comming from US take a long time). In a next post, I will post some photos of my input test bench.

Authored by JkX at JKX Home Page, Added: 13 Aug 2008




http://www.larsen-b.com/Article/255.html

Unsorted Pool