Subscribe
 


USB-FX2 Interface Board (USB-2.0)



USB-FX2 Interface Board (USB-2.0)
Related Videos

A small microcontroller-steered 16bit parallel IO interface board connecting external devices to a computer applying USB-2.0 (high-speed).

This is a USB (universal serial bus) interface board supporting USB-2.0 high speed mode (480Mbit/s).

Features:

Throughput: Actual continuous transfer rates of 35Mb/s (mega bytes not bits).

Flexibility: On-board 8051 microcontroller with 16kb RAM.

FIFO IO: 8 or 16 bit wide, additional handshake lines, 3.3V logic.

Several USB endpoints and buffering configurations (up to 512 bytes, quad-buffered); bulk, isochronous and interrupt transfer.

Several additional free digital IO lines.

Firmware download via USB; optional non-volatile 64kb EEPROM.

USB-powered and externally powered operation.

Very few discrete components.

If you would simply like to connect a microcontroller board to a computer using USB but don't need massive bandwidth (less than 800kb/s), then you may want to have a look at the smaller and cheaper USB8Bit board.

Authored by Wolfgang Wieser at Home and Project Page of Wolfgang Wieser, Added: 18 Sep 2008




http://www.cip.physik.uni-muenchen.de/~wwieser/elec/periph/USB-FX2/

Unsorted Pool