Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Triac based light driver

Triac based light driver

Want to control your room lighting using your computer? Then buy some triacs and opto couplers, build this gadget and plug it into your PC parallel port and voila!

The opto-triacs part number is TLP160G. The pull-down resistors (at the inverters input) are there to make sure the lights stays off when the interface is disconnected from the parallel port. You can add leds showing which outputs are active.

Article By Raphael Ass?nat at http://www.raphnet.net/electronique/triac_lights/triac_lights_en.php

Visit Here for more.

 

More Articles to Read

Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!

Top




Shares