Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Home Antenna

Home Antenna

m
Buy a small tripod stand and a pipe mast. If you do not want to drill into the roof, so buy a sheet of 3/4 ply wood and some sand bags to keep the whole affair from blowing away in the wind.

Connect the coaxial cable to the balun that came with the antenna. Balun means “balanced to unbalanced”, which is a device to connect a coax having a shield and one hot inside conductor to device, here the antenna, having two hot conductors.

Next, having all the wires connected, mount the pipe into the rotator, a pipe into the antenna, and the antenna into the rotator.

Next, run the wires down to the TV and you are done.

Visit Here for more.

 

More Articles to Read

App note: Testing inductors at application frequencies
App note: Testing inductors at application frequencies
App note: Working voltage ratings applied to inductors
App note: Working voltage ratings applied to inductors
1968 Princeton Reverb Repairs
1968 Princeton Reverb Repairs
Skill Sunday: Power Over Ethernet for Arduino
Skill Sunday: Power Over Ethernet for Arduino
More on Color TFT Displays ~ The Big Ones — 240 X 320
More on Color TFT Displays ~ The Big Ones — 240 X 320
Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade

Top




Shares