Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

MS Mic Version 2

MS Mic Version 2

This mic uses two Panasonic WM-55A103 cardioid electret capsules whose outputs are combined to form a figure eight mic for the side output, and a front-firing electret for the mid output. It has a stereo matrixing cicuit with adjustable width and a built-in preamp with adjustable gain providing a line level unbalanced output.
With the mic head mounted directly on the case, the mic is very sensitive to handling noise and floor-transmitted noise. I used a length of five-conductor-plus-shield-and-drain cable and DIN connectors to make an extension cord so I could use the mic with a conventional mic stand. The capsules are a bit sensitive to hum pickup, so I made an enclosure out of brass mesh. The mesh assembly should not be soldered directly to the DIN connector because this results in a VERY resonant structure, almost like a tuning fork. I wrapped the top of the DIN connector with weather stripping and fitted the mesh enclosure over that. The mesh is grounded to the DIN connector with a piece of wire and a wrapping of electrical tape completes the assembly.

Visit Here for more.







 

More Articles to Read

App note: EPIC: Electro-Pyrotechnic Initiator Chip Resistor
App note: EPIC: Electro-Pyrotechnic Initiator Chip Resistor
App note: Noise analysis for high-speed op amps
App note: Noise analysis for high-speed op amps
Skill Sunday: Arrays
Skill Sunday: Arrays
App note: Infrared remote control implementation with MSP430FR4xx
App note: Infrared remote control implementation with MSP430FR4xx
Gesture Controlled Smart Home
Gesture Controlled Smart Home
Design for a Wideband, Differential Transimpedance DAC Output
Design for a Wideband, Differential Transimpedance DAC Output
Wrist thrusters let you fly through the water effortlessly
Wrist thrusters let you fly through the water effortlessly
Bertan/Spellman 225-20R HV power supply teardown
Bertan/Spellman 225-20R HV power supply teardown
Blinking Christmas Lights
Blinking Christmas Lights
Adjusting clock with alarm, hygrometer & thermometer on 1.8″ ST7735 display
Adjusting clock with alarm, hygrometer & thermometer on 1.8″ ST7735 display
Adding an “extra sense” with rangefinders
Adding an “extra sense” with rangefinders
This wireless game controller looks like a rug
This wireless game controller looks like a rug
How to run your ESP8266 for years on a battery
How to run your ESP8266 for years on a battery
Calibration of a 3-Phase Energy Meter Board on the ADE7754
Calibration of a 3-Phase Energy Meter Board on the ADE7754
Making beats on a tiny Arduino DJ controller
Making beats on a tiny Arduino DJ controller
Qinsi-QS5100 Sn63Pb37 solder profile
Qinsi-QS5100 Sn63Pb37 solder profile
Water Detection System
Water Detection System
Professional Hi-Fi 15W Tube Amplifier circuit
Professional Hi-Fi 15W Tube Amplifier circuit
This Arduino machine will judge how sick your ollies are
This Arduino machine will judge how sick your ollies are
Turn an old payphone into a boombox for ’90s hits
Turn an old payphone into a boombox for ’90s hits

Top


Shares