Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Water Proof Maglight Usb Drive

Water Proof Maglight Usb Drive

A fun way to water proof your pen drive. Its very simple and looks cool when finished, Be sure to look at the picture notes for important info.The piece of plastic used was a syringe cap from one of my dads needles
You will need:
Old Mag Light:
1 AA Battery:
Small piece of plastic that fits inside the mag light.:
Needle nose pliers:
Hot Glue gun:
Flash Drive::
not sure how many know this, but there is a spare bulb in the bottom of the light’s cap. To get it all you must do is pull the spring off with pliers and the thing should fall out if tipped up side down.:
To get the “thing” out all you do is take a small flat head screw driver and pry them apart. There’s is two parts to the “thing” one should fall out the back of the light. Save these::
. Get you battery, THING, and small piece of plastic.::
. The piece of plastic I used was a syringe cap from one of my dads needles (diabetic).

Visit Here for more.

 

More Articles to Read

avatar
EEWeb
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Arduino Blog
avatar
Ken Shirrif
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Freetronics
avatar
Arduino Blog
avatar
Dangerous Prototypes

Top




Shares