Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Fast, Quick, Cheap, Good looking LED room lighting

Fast, Quick, Cheap, Good looking LED room lighting

What the author hopes to show you is how to make quick and good looking LED lighting that too on a tiny buget.
You will need
Cable
LEDs
Resistors (510Ohms for 12V)
Stapels
Soldering iron
Cutters and other basics
Hammer and a nail!
Cable up the room
Quick and easy you need to run 2 cables and make sure you dont cross them over at any point or itll get messy.
Make the LEDs
LEDs only work one way around so make sure all the LEDs + (positive) legs (the end with the resistor) goes in the same cable.
Take the nail and puncture the cable cover so that you can stick the legs of the LED into the cable
Then Power on.

Visit Here for more.

 

More Articles to Read

Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!

Top




Shares