Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

6 Amp Solar Power Center

6 Amp Solar Power Center

This contains a photovoltaic charge controller and a low voltage load disconnect circuit. It can be used to handle all of the power functions for small 12 Volt solar powered devices.
The low voltage disconnect has a load on-off switch, and a battery low voltage indicator. By using the SPC2 as the center of a solar powered device, long battery life is assured. The SPC2 is primarily designed to be a solar lighting controller, it can be used to power radios and other high capacitance loads with a minor switch and circuit modification.

The circuit was designed with the following goals:

Single board smart light switch.
Analog simplicity with common parts for ease of repair.
High efficiency: low loss charging and minimal idle current.
Radio-quiet operation, low frequency charge control switching.

Specifications

Nominal battery voltage: 12V
Maximum solar panel current: 6 Amps
Maximum load current: 6 Amps, more with an external solid-state relay
Night time battery drain current: approximately 10 micro-amps
Temperature compensation for use in variable climates
Radio-quiet operation

Visit Here for more.

 




Top