Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Car Dash Camera Mount

Car Dash Camera Mount

An inexpensive or CHEAP and efficient WORKING way of mounting a video camera to the dash of my car for recording purposes.Trace around your Camera taking note of all nooks and crannies
Take a sharp, Sharp exacto knife (Careful) and cut out the section where the camera is to fit.
also cut a round slot for a tube that you will see in an upcoming step/photo.
Take a chunk of non slip grippy mat stuff (Also available from Canadian Tire / Hardware store) and cut it however you want to fit on the underside of the sponge.
You can glue it if you want but I didn’t because it is already very non slippy… and grippy.
This is the tube I was talking about earlier.
This is the tube I was talking about earlier.
Insert the tube of Pennies (The Weight) into the penny tube slot..
Insert Camera in to the camera slot.
If you cut this right it should fit nice and snug.
Viewing screen is turned forward so we can see if I or we are in frame.
Cables for camera come from the back of the camera.
plugged it into the car outlet for unlimited power

Visit Here for more.

 

More Articles to Read

Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
Shirt Pocket Transceiver with the Si5351 and OLED
Shirt Pocket Transceiver with the Si5351 and OLED
All metal C930e webcam
All metal C930e webcam
The Soldering Tools That Make Your Life Easier
The Soldering Tools That Make Your Life Easier
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 c ...
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 cell Lithium ion battery protection

Top




Shares