Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

RF Output Window Design for HELIX TWT

RF Output Window Design for HELIX TWT

An output circuit of a helix traveling wave tube was modeled in High Frequency Structure Simulation (HFSS) 3D software.
The challenge was to first determine how to model the circuit in HFSS and later match the model results to real measurements made with hardware. Upon the agreement of the model and hardware results a design change was attempted to make the circuit have a better VSWR than 1.5:1 in the frequency range of 12-18GHz. After making few changes in the geometry the circuit was able to give a VSWR less than 1.5:1.

Visit Here for more.

 

More Articles to Read

Single-Sided USB Charger
Single-Sided USB Charger
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Replace a microwave’s beeping with the Windows XP startup sound
Replace a microwave’s beeping with the Windows XP startup sound
A DIY Laser Scanning Microscope
A DIY Laser Scanning Microscope
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
ESP8266 LED lighting: QuinLED v2.6 PCB
ESP8266 LED lighting: QuinLED v2.6 PCB
Switching LVDS Graphics in a Laptop Computer
Switching LVDS Graphics in a Laptop Computer
Teleknitting: TV-based string art
Teleknitting: TV-based string art
DIY Bubble Machine
DIY Bubble Machine
Start your day with Nerf target practice!
Start your day with Nerf target practice!
Teardown of a Peaktech 6225A
Teardown of a Peaktech 6225A

Top




Shares