Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Go ATV Portable With This Simple Beam Antenna

Go ATV Portable With This Simple Beam Antenna

A simple broadband yagi antenna that can be built on a 4 foot boom and used for portable ATV, SSB, or satellite work on the 70-cm band. The antenna design was optimized for broadband performance using YAGIMAX software.
The antenna should be built on a non-conducting boom, such as a wooden ferring strip or dowel. The elements are #10 solid copper wire (with insulation removed). The driven element is matched to a 50 ohm unbalanced feed using a `T’ match and a half wavelength coaxial balun.

Visit Here for more.

 

More Articles to Read

Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser

Top




Shares