Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Solar Power System

Solar Power System

This instructable will show you everything you need to put together a pretty good sized electric solar panel system. Things you will need.
Requirements:

Solar panels

Charge controller

Battery charger

2 AWG cable

At least one 12 Volt marine deep cycle battery

Mechanical lugs

1 power inverter

1 Rubbermaid tote or other container

1 battery charger

Tools:

Cable cutters

Red electrical tape

Screwdriver

Drill

Preparing the batteries.

The first thing you want to do is charge your batteries with a charger. This will insure they are charged to capacity and ready to go at set up. I purchased my batteries new and were only at about 60%.

While the batteries are charging, you can set up the solar panels and get them wired up and ready to go.

Connecting the charge controller and inverter to the batteries.

Next we connect the charge controller and the inverter to the batteries. You will want to make sure the inverter is turned off and the charge controller is not connected to the solar panels yet.

Crescent Wrench

Visit Here for more.

 

More Articles to Read

Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser

Top




Shares