Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Theft preventer alarm

Theft preventer alarm

This circuit utilising a 555 timer IC can be used as an alarm system to prevent the theft of your luggage, burglars breaking into your house etc. The alarms goes ON when a thin wire, usually as thin as a hair is broken.
The circuit is straightforward. It uses a 555 IC wired as an astable multivibrator to produce a tone of frequency of about 1kHz which gives out a shrill noise to scare away the burglar.

The wire used to set off the alarm can be made of a thin copper wire like SWG 36 or higher.

You can even use single strands of copper form a power cable.

The circuit operates on a wide range of voltages from 5V to 15V.

The speaker and the circuit could be housed inside a tin can with holes drilled on the speaker side for the sound to come out.

Visit Here for more.

 

More Articles to Read

#FreePCB via Twitter to 2 random RTs
#FreePCB via Twitter to 2 random RTs
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
Shirt Pocket Transceiver with the Si5351 and OLED
Shirt Pocket Transceiver with the Si5351 and OLED
All metal C930e webcam
All metal C930e webcam
The Soldering Tools That Make Your Life Easier
The Soldering Tools That Make Your Life Easier
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 c ...
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 cell Lithium ion battery protection
Synthesized Sidetone
Synthesized Sidetone

Top




Shares