Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

DIY KT88 + 6SN7 push-pull Amp

DIY KT88 + 6SN7 push-pull Amp

The main difference between single-end and push-pull, is distortion. In fact, SE produce a lot of harmonics, so a lot of distortion. Beside this is a bad idea for a power amp, this is really what a lot of people call a real tube sound.
The main issue right now, is that push-pull are a lot of more complicated. I mean you can build a simple SE with only a spare components.. this is not the case of a push-pull. For a single channel, I need 2 tubes, 1 bias power-supply, a highly regulated power supply and a phase shifter ..

For the tubes, I decided to use some KT88. In fact, a friend give me a spare matched quad of NOS (plain old) Gold Lion tubes + the needed output transformers so .. This tube are really great for the HIFI. And they look really great.

For the input stage, I decided to do something not really common. In fact most tube amps use some ECC82 / ECC83 for the input stage. My choice is something little different cause, I want to use some bigger tube. A lot of people say the 6SN7 (or 12SN7) are great for this stuff too. And some high quality power amps tube this, so why not. After looking for a while for a good schematic, and tested severalls stuff, here the one I gonna build:

In the comming (soon I hope), I will describe the schem and the modification I made. Right now, I’m waiting for the power transformer (comming from US take a long time). In a next post, I will post some photos of my input test bench.

Visit Here for more.

 

More Articles to Read

Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)

Top




Shares