Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Grouped DCC Block Occupancy Detectors

Grouped DCC Block Occupancy Detectors

This page shows a successful attempt to operate block occupancy detectors for DCC systems in a closely spaced group and with cabled wiring.
All of the detectors in this test functioned correctly with no evidence of interference between units. The detection sensitivity of the circuit is just under one milliamp.

The detectors are a diode – voltage drop type. These detectors are designed to operate on DCC systems. ORANGE = supply to the circuit – BLUE = signal wire from block – YELLOW = common of circuit and block system.

The LEDs indicates a train detection. The output is optoisolated. The individual circuit boards were left attached for ease of installation.

Visit Here for more.

 

More Articles to Read

avatar
EEWeb
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Arduino Blog
avatar
Ken Shirrif
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Freetronics
avatar
Arduino Blog
avatar
Dangerous Prototypes

Top




Shares