Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

ICL8038 based Oscillator

ICL8038 based Oscillator

The circuit is a fairly easy design: It consists of the actual VCO (ICL8038 with supplement parts), the sine and triangle output stage (LT1210) and the CMOS-compatible output stage using the MOSFET driver chip ICL7667.
The circuit here presents an Oscillator featuring the following attributes:

1.1A guaranteed output current for sine and triangle waves with thermal shutdown and protection diodes

Variable offset and gain for the sine/triangle output

CMOS-compatible complementary square wave outputs capable of driving into 50 Ohm with rise/fall times of 30ns at 10V (new in Rev 3).

Frequency range 0.5Hz to 300 kHz (but signal degenerates when approaching the upper frequency limit)

Single supply operation, 5V to 15V

About 50% duty cycle (non-precision and adjustable via a trim pot)

Visit Here for more.

 

More Articles to Read

Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!

Top




Shares