Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Solid State 0-30MHZ RF Power Amplifier using MRF455

Solid State 0-30MHZ RF Power Amplifier using MRF455

Radio amateurs, especially those who make QRP transmitters or exciters, are always looking for a linear amplifier to get more RF Output.
I made this project about 6 years back and bought plenty of MRF455 from RF Parts Co. I made a PTH PCB and also bought necessary Toroidal cores from Amidon. I wanted to make a linear for local QRP group but they never completed their project.

Here I have place technical information, Schematic for this project with a partial kit made available in small quantity at lowest possible cost. Kit cost basically comprise of transistors & Toroids. PCB is supplied free of charge.

Visit Here for more.

 

More Articles to Read

Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!

Top




Shares