The circuit below is a standard oscillator of the Colpitts variety. Similar circuits have been used in many ham radio homebrew transmitters.
This particular circuit should function well at frequencies from 1500 kHz to 8000 kHz. For use on lower frequencies, the values of C1 and C2 might need to be increased.
If you’ve never built a circuit from a schematic before, this might be a good one to start with. The diagram below shows how you can arrange the parts on a prototyping board such as Radio Shack catalog number 276-175. (A prototyping board, also called a solderless breadboard, contains groups of holes that are electrically connected. Each hole has a little spring/clamp thingy in it that grabs ahold of the component leads. This is a great way to experiment with circuit designs and learn about the building process.)
Visit Here for more.