Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Add a fuse where it´s desirable

Add a fuse where it´s desirable

Without problems and directly at connecting a device. How? With a new Euroclamp MPF03 terminal block with integrated fuse holder.

Nowadays, when “almost everything” works on electricity we can see still more devices connected to mains line. That´s why it often happens, that many small-power devices are connected to one (circuit breaker fused) line. To increase a safety, it´s usually advantageous to fuse particular devices separately – for example by small glass fuses. Somewhere it´s advantageous on a panel or directly on a PCB, elsewhere directly in a control relay interface module and in many cases directly in a place of connection.

For this purpose a novelty in our offer is very suitable – 3-pole terminal block MPF03-10, where one of poles is fused by a glass tube fuse 5x20mm. In praxis it can look so, that on a place where you so far used a classic (“chocolate”) terminal block, you can use MPF03 and insert a suitable fuse.

In the MPF series can be found series with 1-5 poles. As already a name says, pin spacing (pitch) of the MPF series is 10mm. On stock we have the 3-pole version MPF03-10 ideally suitable for mains line appliances (L,N,PE). Exact dimensions and further parameters can be found in the Euroclamp MPF03-10 datasheet.


Add a fuse where it´s desirable – [Link]

 

More Articles to Read

avatar
EEWeb
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Arduino Blog
avatar
Ken Shirrif
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Freetronics
avatar
Arduino Blog
avatar
Dangerous Prototypes

Top




Shares