Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Powerpole Fused Distribution Board Case

Powerpole Fused Distribution Board Case

Since building the Powerpole fused distribution boards we have been planning to make a case to prevent accidental short circuits on the pcb boards when power is applied.

We looked at commercial cases and found some suitable plastic boxes but we felt that it would be easier to make cases from thin plastic sheet and join the parts together with bolts or long screws.

We made two cases for the boards using 3mm and 6mm acrylic sheet. The plans for the cases can be downloaded in PDF format below:

Download PDF Plans.

Cut parts Black and clear case Clear Case

 

More Articles to Read

Single-Sided USB Charger
Single-Sided USB Charger
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Replace a microwave’s beeping with the Windows XP startup sound
Replace a microwave’s beeping with the Windows XP startup sound
A DIY Laser Scanning Microscope
A DIY Laser Scanning Microscope
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
ESP8266 LED lighting: QuinLED v2.6 PCB
ESP8266 LED lighting: QuinLED v2.6 PCB
Switching LVDS Graphics in a Laptop Computer
Switching LVDS Graphics in a Laptop Computer
Teleknitting: TV-based string art
Teleknitting: TV-based string art
DIY Bubble Machine
DIY Bubble Machine
Start your day with Nerf target practice!
Start your day with Nerf target practice!
Teardown of a Peaktech 6225A
Teardown of a Peaktech 6225A

Top




Shares