Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

An Android reflow controller that anyone can build

An Android reflow controller that anyone can build

Andy Brown published a new build, an Android reflow controller:

 The only surface mount device on this PCB is the MAX31855 and it has a low number of generously spaced pins. I eschewed my hot air gun, previous reflow oven and hot plate in favour of a plain old iron and the tack-soldering method because I wanted to show how easy it is to assemble this PCB and you can see me soldering the MAX31855 in the video that accompanies this article. No laughing at the back please; it’s hard to solder from behind a video camera!

Project info at Andy’s blog.

Check out the video after the break.

Read more Here

 

More Articles to Read

Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser

Top




Shares