Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Implementation of FatFs on Serial Flash

Implementation of FatFs on Serial Flash

The SmartFusion® customizable system-on-chip (cSoC) device contains a hard embedded microcontroller subsystem (MSS), programmable analog circuitry, and FPGA fabric consisting of logic tiles, static random access memory (SRAM), and phase-locked loops (PLLs). The MSS consists of a 100 MHz ARM® CortexTM-M3 processor, advanced high-performance bus (AHB) matrix, system registers, Ethernet MAC, DMA engine, real-time counter (RTC), embedded nonvolatile memory (eNVM), embedded SRAM (eSRAM), fabric interface controller (FIC), the Philips Inter-Integrated Circuit (I2C), serial peripheral interface (SPI), and external memory controller (EMC).

This application note describes:

• How to port and use the FatFs file system on the serial flash connected to the SPI interface of the SmartFusion Evaluation Kit Board and the SmartFusion Development Kit Board

• Configuration options of the FatFs

• How to use the SmartFusion RTC for the timestamping requirements of the FatFs

 

More Articles to Read

avatar
EEWeb
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Arduino Blog
avatar
Ken Shirrif
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Freetronics
avatar
Arduino Blog
avatar
Dangerous Prototypes

Top




Shares