Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Beaglebone Black music box project

Beaglebone Black music box project

Brian’s Beaglebone Black music box project:

 I would like to thank Miero for his hard work on the linux I2S driver for Beaglebone Black’s SOC without the driver this project would not exist.
You can see the design in its enclosure here below and in the following video
The design is essentially complete and tested as of 7/12/2015. Software and hardware are fully functional.

Via the forum.

Check out the video after the break.

Read more Here

 

More Articles to Read

A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors

Top




Shares