Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Souliss device ESP based combined with 3D Printing

Souliss device ESP based combined with 3D Printing

Juan has been working on a Souliss device ESP based project, that is available at Github:

With this board we can control 3 monocolor led strips (or 1 RGB), can host multiple sensors and options to come by external modules or internal conectors, Im working on this modules now. For now this board can host a LDR to meassure light on the room, temperature , humidity, pressure, pir, rain sensors… . It have an I2C and ICSP connectors, so we can connect Displays and others directly on the board.
Network settings can be configured via webinterface, and most important Slots can be configured too, you can see multiple options on my GITHUB.
Power is regulated from 12v to 3.3v. No heating problems.
It have 2 buttons, one for reset and other to enable program mode, can be used like a standard button too!

Project details at Juan’s Google Groups.

Read more Here

 

More Articles to Read

Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
Shirt Pocket Transceiver with the Si5351 and OLED
Shirt Pocket Transceiver with the Si5351 and OLED
All metal C930e webcam
All metal C930e webcam

Top




Shares