Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

SMT Desoldering Station

SMT Desoldering Station

Working with SMT is quite difficult without an smt hot air pencil. Anyone with basics electronics can try to build it, it’s made with common materials.

An smt desoldering station is made up of : a heater, that is a powerful solder (min 50watt), a hot exchanger (IRON WOOL), an air pump. Building the air pump isn’t so much difficult as it seems, first of all get your mini hair dryer, remove everything except the motor and the final rotor, cut only the handle and the rotor’s plastic cover, that from which the air enter ( to get more air flow ), take a plastic 66cl pet bottle (coke, fanta and so on ) cut it making such as a funnel, insert it in the out hole of the dryer use some hot glue to fix it, better if it ‘s inserted with a little pressure, then take the cap , get a short brass tube of 0.5 cm diameter, make the hole on the cap to fit perfectly the tube, insert the tube, use some hot glue to fix it .Now you can use such metal tube to fit the plastic tube to get air outside. At the end you will have a desoldering smt station for less than 50 $ , with characteristics not really different from those commercials ones.

Visit Here for more.

 

More Articles to Read

Single-Sided USB Charger
Single-Sided USB Charger
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Replace a microwave’s beeping with the Windows XP startup sound
Replace a microwave’s beeping with the Windows XP startup sound
A DIY Laser Scanning Microscope
A DIY Laser Scanning Microscope
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
ESP8266 LED lighting: QuinLED v2.6 PCB
ESP8266 LED lighting: QuinLED v2.6 PCB
Switching LVDS Graphics in a Laptop Computer
Switching LVDS Graphics in a Laptop Computer
Teleknitting: TV-based string art
Teleknitting: TV-based string art
DIY Bubble Machine
DIY Bubble Machine
Start your day with Nerf target practice!
Start your day with Nerf target practice!
Teardown of a Peaktech 6225A
Teardown of a Peaktech 6225A

Top




Shares