Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

3D printed case for Bus Blaster v4

3D printed case for Bus Blaster v4

Dretay made a 3D-printed Bus Blaster v4 case:

A basic enclosure for the Dangerous Prototypes Bus Blaster v4. The enclosure needs to be the full height of the programmer due to the jumpers. In the future I may trim down the jumpers on my board and use a thinner case that exposes more of the JTAG header. I’ve included the 123Design source file in case you’d like to modify it further.

 

Read more Here

 

More Articles to Read

Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser

Top




Shares