Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Mullard 3-3 amplifier project (part 1)

Mullard 3-3 amplifier project (part 1)

Dilshan Jayakody has published a new build, a Mullard 3-3 amplifier project:

Mullard 3-3 is quiet popular 3W tube amplifier introduced by Mullard Ltd in 1956. A schematic and design detail of this amplifier is available in “Mullard Circuits for Audio Amplifiers” book and in National Valve Museum article. This amplifier is based on EF86, EL84 vacuum tubes and EZ80 full wave rectifier tube. In this project we decided to construct this original Mullard 3-3 Amplifier with some slight changes and commonly available electronic components.
In our prototype we replace EZ80 tube with 400V 5A bridge rectifier which is commonly available in many electronic spare parts shops. Also we replace EL84 with 6P14P pentode and EF86 with 6J8 pentode. Both of these valves can directly use with this circuit and those values are available for lesser price than EL84, EF86 tubes.

Project info at Dilshan Jayakody’s blog.

Read more Here

Pinned onto

Related Pins

Skill Sunday: Uploading to your Arduino via a Network
Skill Sunday: Uploading to your Arduino via a Network
One Phase Power Meter
One Phase Power Meter
WiFi Toilet Vacancy Sensor
WiFi Toilet Vacancy Sensor
HAL 9000 reimagined as a useless machine
HAL 9000 reimagined as a useless machine
Using the XMEGA Clock System
Using the XMEGA Clock System
An Arduino VU meter for classrooms
An Arduino VU meter for classrooms
DIY Calculator
DIY Calculator
Build your own robotic vacuum from scratch
Build your own robotic vacuum from scratch
An animatronic talking takeout container
An animatronic talking takeout container
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
IDE 1.6.12 released with Sierra support and more
IDE 1.6.12 released with Sierra support and more
IoT Propane Tank
IoT Propane Tank
Industry Standard Single-Ended Current Mode PWM Controller
Industry Standard Single-Ended Current Mode PWM Controller
Wifi enabled 8×64  pixel  LED  matrix display
Wifi enabled 8×64 pixel LED matrix display
Arduino Disco Lights
Arduino Disco Lights
PIXIE is an Arduino-based NeoPixel watch
PIXIE is an Arduino-based NeoPixel watch
How to run C programs on the BeagleBone’s PRU microcontroller
How to run C programs on the BeagleBone’s PRU microcontroller
Capture time-lapses with a steel and aluminum camera slider
Capture time-lapses with a steel and aluminum camera slider
The MR-808 is a robotic drum “synthesizer”
The MR-808 is a robotic drum “synthesizer”
HDMI 2.0 Implementation on Kintex-7 FPGA GTX Transceivers
HDMI 2.0 Implementation on Kintex-7 FPGA GTX Transceivers

Top


Shares