Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Zynq-7000 AP SoC Isolation Design Flow Lab

Zynq-7000 AP SoC Isolation Design Flow Lab

This lab application note describes the creation and implementation of a single chip cryptography (SCC) system using redundant Keccak hash modules with compare logic. Complete step-by-step instructions are given for the entire process, explaining the use of the Isolation Design Flow (IDF). This document explains how to implement isolated functions in a single Xilinx® Zynq®-7000 All Programmable SoC device for the example SCC solution. Even though this application note explains how to implement a design using the IDF for a Zynq-7000 device, the same process can be used to implement an IDF design using any 7 series FPGA device.

With this application note, designers can develop a fail-safe single chip solution using the Xilinx IDF that meets fail-safe and physical security requirements for an example high-assurance application.

 

Read more Here

 

More Articles to Read

Skill Sunday: Power Over Ethernet for Arduino
Skill Sunday: Power Over Ethernet for Arduino
More on Color TFT Displays ~ The Big Ones — 240 X 320
More on Color TFT Displays ~ The Big Ones — 240 X 320
Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build

Top




Shares