Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

An Android TV-stick baseboard

An Android TV-stick  baseboard

Necromant designed and built an Android TV stick baseboard:

The idea was dumb simple. I needed a USB hub, since TV sticks don’t have many USB ports included. I needed GPIOs, so I threw in an attiny2313 that occupied one of the HUB’s ports, I needed a few relays and I wanted to control the power of some of the ports. Since TV sticks have their power input and usb power connected you can just supply power for the stick via the USB host port.  Finally I wanted this whole thing to work from a 12-24V power supply, so an on-board 3A DC-DC was a must.

More details at Necromant’s project page.

Read more Here

 

More Articles to Read

Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)

Top




Shares