Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

A seven watt FM stereo transmitter for your personal radio station

A seven watt FM stereo transmitter for your personal radio station

If you are good at soldering, then you will be able to build this stereo FM transmitter for your personal radio station or any other hobby use.

It uses 51 series micro-controller and a dot-matrix LCD display, This will show you frequency, output power and other relevant information on screen.

After building and testing this, enclose it inside a beautiful metal enclosure and mount the heat-sink at the enclosure body.

7w_stereo_tx_diy_2

Add a 50 ohm antenna, 12v stable power supply (we recommend lead-acid type battery, it draws maximum 3 ampere current at full power) and a stereo audio source and you are done.

It has as high as 63dB stereo separation, so your music will hear crisp on a similar high quality FM receiver. We have seen the quality of this little baby is at par with any broadcast station.

You can adjust the output RF power from 0.5W to 7W within the entire 76MHz to 108MHz broadcast spectrum.

There are more precise specification, don’t forget to read them here.

You can get this Here for just under $33, shipped Free anywhere in the world.

Pinned onto

Related Pins

App note: General overview of IR transmission in free ambient
App note: General overview of IR transmission in free ambient
Sonicare toothbrush teardown: microcontroller, H bridge, and inductive charging
Sonicare toothbrush teardown: microcontroller, H bridge, and inductive charging
App note: Using Vishay infrared receivers in a Wi-Fi environment
App note: Using Vishay infrared receivers in a Wi-Fi environment
Skill Sunday: Uploading to your Arduino via a Network
Skill Sunday: Uploading to your Arduino via a Network
One Phase Power Meter
One Phase Power Meter
WiFi Toilet Vacancy Sensor
WiFi Toilet Vacancy Sensor
HAL 9000 reimagined as a useless machine
HAL 9000 reimagined as a useless machine
Using the XMEGA Clock System
Using the XMEGA Clock System
An Arduino VU meter for classrooms
An Arduino VU meter for classrooms
DIY Calculator
DIY Calculator
Build your own robotic vacuum from scratch
Build your own robotic vacuum from scratch
An animatronic talking takeout container
An animatronic talking takeout container
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
IDE 1.6.12 released with Sierra support and more
IDE 1.6.12 released with Sierra support and more
IoT Propane Tank
IoT Propane Tank
Industry Standard Single-Ended Current Mode PWM Controller
Industry Standard Single-Ended Current Mode PWM Controller
Wifi enabled 8×64  pixel  LED  matrix display
Wifi enabled 8×64 pixel LED matrix display
Arduino Disco Lights
Arduino Disco Lights
PIXIE is an Arduino-based NeoPixel watch
PIXIE is an Arduino-based NeoPixel watch
How to run C programs on the BeagleBone’s PRU microcontroller
How to run C programs on the BeagleBone’s PRU microcontroller

Top


Shares