Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

USBuddy: USB development tool

USBuddy: USB development tool

Jakub has designed and built a USB breakout board with current monitor, an open hardware tool – USBuddy:

Do you sometimes develop with USB? I do. So I need to access data lines, bus voltage and I’d like to easily monitor the current too. I made myself a small companion (43.5 mm × 22.5 mm, 9.5 g) to do that. Just a simple breakout board with one connector in and one out. And a little extra to make things easier. I call it USBuddy.

Project info at Kaktus Circuits blog. It’s also up on Tindie.

Read more Here

Pinned onto

Related Pins

One Phase Power Meter
One Phase Power Meter
WiFi Toilet Vacancy Sensor
WiFi Toilet Vacancy Sensor
HAL 9000 reimagined as a useless machine
HAL 9000 reimagined as a useless machine
Using the XMEGA Clock System
Using the XMEGA Clock System
An Arduino VU meter for classrooms
An Arduino VU meter for classrooms
DIY Calculator
DIY Calculator
Build your own robotic vacuum from scratch
Build your own robotic vacuum from scratch
An animatronic talking takeout container
An animatronic talking takeout container
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
IDE 1.6.12 released with Sierra support and more
IDE 1.6.12 released with Sierra support and more
IoT Propane Tank
IoT Propane Tank
Industry Standard Single-Ended Current Mode PWM Controller
Industry Standard Single-Ended Current Mode PWM Controller
Wifi enabled 8×64  pixel  LED  matrix display
Wifi enabled 8×64 pixel LED matrix display
Arduino Disco Lights
Arduino Disco Lights
PIXIE is an Arduino-based NeoPixel watch
PIXIE is an Arduino-based NeoPixel watch
How to run C programs on the BeagleBone’s PRU microcontroller
How to run C programs on the BeagleBone’s PRU microcontroller
Capture time-lapses with a steel and aluminum camera slider
Capture time-lapses with a steel and aluminum camera slider
The MR-808 is a robotic drum “synthesizer”
The MR-808 is a robotic drum “synthesizer”
HDMI 2.0 Implementation on Kintex-7 FPGA GTX Transceivers
HDMI 2.0 Implementation on Kintex-7 FPGA GTX Transceivers
Meet Floris.cc: a new Genuino reseller in The Netherlands
Meet Floris.cc: a new Genuino reseller in The Netherlands

Top


Shares