Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Build a Cloud-Connected ESP8266 Power Meter

Build a Cloud-Connected ESP8266 Power Meter

Measure the DC power consumption of your devices on the cloud @ adafruit.com

Controlling the electrical consumption in your home is one of the most important thing you can do, both because of environmental concerns & to reduce the electricity bill at the end of the month. There are countless of electrical power meters out there, but in this guide, I’ll show you how to build your own, and to use the ESP8266 feather board to measure how much power a single device is using. Note that this guide is about measuring power for DC (Direct Current) devices only.

Build a Cloud-Connected ESP8266 Power Meter – [Link]

The post Build a Cloud-Connected ESP8266 Power Meter appeared first on Electronics-Lab.

 

More Articles to Read

Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)

Top




Shares