Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

How to Interface Flux Sensor

How to Interface Flux Sensor

This tutorial is going to teach you the basics on using Flux Sensor:

It is a flex sensor which is 2.2 inches in length. This sensor works by bending the sensor itself. As the sensor is being flexed or bent, the resistance across the sensor increases. The greater the angle of bending, the greater the resistance. This can be tested with multimeter. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).

How to Interface Flux Sensor – [Link]

The post How to Interface Flux Sensor appeared first on Electronics-Lab.

 

More Articles to Read

Make your reflex punching bag interactive with Arduino
Make your reflex punching bag interactive with Arduino
DIY thermal imaging
DIY thermal imaging
IR thermometer hacked into an IR camera
IR thermometer hacked into an IR camera
Bookcase automatically opens to reveal secret lair
Bookcase automatically opens to reveal secret lair
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)

Top




Shares