Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

DIY 3D Printer

DIY 3D Printer

Have you ever wished that you had your own 3D printer? Are you finding the cost of purchasing your own 3D printer prohibitive? With this fantastic instructable from AlmusYang you can build your own 3D printer from scratch! Not only will you learn a lot about how 3D printing works, but you will be able to quickly build models or prototypes right from the comfort of your own home.  

If you still weren’t convinced, an Arduino provides the brains for this 3D printer meaning that the project is very easily modified and adapted to your own purposes. This project is very well documented with full laser cutting templates and code samples provided. If the idea of building your own 3D printer is sparking your interest you can check out the full instructions at the following link.

Typically, a key component of a 3D printer are the stepper motors that control the precise printing movement.

Read more Here

Pinned onto

Related Pins

One Phase Power Meter
One Phase Power Meter
WiFi Toilet Vacancy Sensor
WiFi Toilet Vacancy Sensor
HAL 9000 reimagined as a useless machine
HAL 9000 reimagined as a useless machine
Using the XMEGA Clock System
Using the XMEGA Clock System
An Arduino VU meter for classrooms
An Arduino VU meter for classrooms
DIY Calculator
DIY Calculator
Build your own robotic vacuum from scratch
Build your own robotic vacuum from scratch
An animatronic talking takeout container
An animatronic talking takeout container
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
Restoring a Xerox Alto day 7: experiments with disk and Ethernet emulators
IDE 1.6.12 released with Sierra support and more
IDE 1.6.12 released with Sierra support and more
IoT Propane Tank
IoT Propane Tank
Industry Standard Single-Ended Current Mode PWM Controller
Industry Standard Single-Ended Current Mode PWM Controller
Wifi enabled 8×64 pixel LED matrix display
Wifi enabled 8×64 pixel LED matrix display
Arduino Disco Lights
Arduino Disco Lights
PIXIE is an Arduino-based NeoPixel watch
PIXIE is an Arduino-based NeoPixel watch
How to run C programs on the BeagleBone’s PRU microcontroller
How to run C programs on the BeagleBone’s PRU microcontroller
Capture time-lapses with a steel and aluminum camera slider
Capture time-lapses with a steel and aluminum camera slider
The MR-808 is a robotic drum “synthesizer”
The MR-808 is a robotic drum “synthesizer”
HDMI 2.0 Implementation on Kintex-7 FPGA GTX Transceivers
HDMI 2.0 Implementation on Kintex-7 FPGA GTX Transceivers
Meet Floris.cc: a new Genuino reseller in The Netherlands
Meet Floris.cc: a new Genuino reseller in The Netherlands

Top


Shares