Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

CO2, temperature and humidity monitor

CO2, temperature and humidity monitor

An open source CO2 monitoring project from Roving Dynamics:

The project described below uses a MH-Z16 or MH-Z19 CO2 sensor and a DHT-22 (or DHT-11 if less accuracy is required) to measure the Temperature and Humidity. It has a 4 line by 20 character LCD Display to show the current readings and status, a warning alarm and two relays which can be triggered on a low CO2 (Generally above 1000 ppm) normally to switch on an extractor fan and a high level (4000 ppm) which will trigger a warning device such as an external alarm. There are two models I used the 0 to 5000 ppm device here but the code will be the same for the 0 to 10000 ppm model.

Project info at rodyne.com.

 

Top