Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Build your own Eject-A-Bed

Build your own Eject-A-Bed

Do you ever struggle to get your kids out of bed in the morning? With this awesome hack from Jamie Dixon you can modify an old adjustable hospital bed so that you can control it over the internet, from anywhere in the world. With a simple push of a button on your phone or computer you can tilt the bed from a comfortable horizontal position into a vertical position sending the occupant of the bed flying out of their bed and hopefully waking them up without causing any serious injuries!

The eject a bed is controlled by Raspberry Pi 2 which talks to a servo and an Arduino. This is a really great project for learning how to control things over the internet and is sure to be lots of fun as well. For more information check out the following link or the video below.

Read more Here

 

More Articles to Read

Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!

Top




Shares