Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

App note: Novel current-sense measurement with automatic offset correction

App note: Novel current-sense measurement with automatic offset correction

Silicon Labs’ application note about a low power current measurement circuit using TS1001 nano power op-amp paired with low-power CY8C38 microcontroller, Link here (PDF)

Pairing a simple circuit using nanopower analog op amps with a microcontroller can monitor single battery cells and solar harvesters. Pairing up a 0.65 V/1 µA nanopower op amp with the low-power Cypress PSoC3 microcontroller and some simple external circuitry can yield a very low current measurement system, suitable for monitoring miniature power harvesting solar cells or a single-cell battery. The circuit operates on a few microamps at 1.8 V; optionally, the whole circuit can be self-powered from the source being measured. The op amps operate from voltages as low as 0.65 V and are connected directly to the cells; the PSoC3 microcontroller utilizes an internal boost regulator which operates from sources as low as 0.5 V.

 

More Articles to Read

avatar
EEWeb
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Arduino Blog
avatar
Ken Shirrif
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Freetronics
avatar
Arduino Blog
avatar
Dangerous Prototypes

Top




Shares