Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Artificial star unit

Artificial star unit
Star test is the most recommended method to test and collimate telescopes. To do a “star test” we need to aim and track telescope with real star and most of the times this is quite difficult to do because of fast movement of stars and bad sky conditions. Another problem with real star is air turbulence and some times this effect may leads to false conclusions.

However artificial star is an excellent alternative for “real star test” and in this post we introduce easy to build “artificial star unit” to test and collimate telescopes. This unit is based on commonly available electronic components and it can operate with 9V battery. At the time of writing this unit can build around LKR 1000.00 (Approximately 7.00 – 8.00 USD).

In this given design we use NE555 timer IC to generate PWM output to LED and this allow us to control intensity of the artificial star. In our prototype we use high-bright 3mm white LED as our light source.

Apart from circuit the next most important thing in this unit is it’s LED mounting. Since real star appears like “point of light” this artificial star must appear as a point of light. To archive this same effect we dill 300 micron (0.3mm) pin-hole in our casing as shown in below.

Prototype version of artificial star unit. Output pin-hole is located in left side of this box.

We test and collimate several telescopes with this unit, which including 8” and 10” Newtonians, 6” and 11” Schmidt-Cassegrain telescopes. Now we use this unit periodically to test our scopes for collimation and related issues.

PCB, schematic and wiring diagrams of this “Artificial Star Unit” is available to download at elect.wikispaces.com.

Read more Here

 

More Articles to Read

Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser

Top




Shares