To test the behavior of this 4-bit ALU we decided to construct it on Altera MAX II CPLD. For this project we choose EPM240T100C5 CPLD and logic design is implement using Altera Quartus II. For logic design we refer Fairchild Semiconductor’s DM74LS181 datasheet. This setup is tested on basic EPM240 series development board with some mechanical switches and couple of LEDs.
|74181 4-bit ALU test setup with EPM240T100C5 development board.|
There are several test circuits available for 74181 ALU and our test setup is partially based on Electronics for Your (EFY) 1997 article. In another test setup we use HEF4040 to drive, A and B operands of this ALU.
The test setup attached into this article is the minimum configuration which anyone can build with small number of commonly available electronic components.
All the downloadable content related to this project are available at elect.wikispaces.com.