Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Guide for BMP180 barometric sensor with Arduino

Guide for BMP180 barometric sensor with Arduino

A how-to on using the BMP180 barometric sensor with the Arduino from Random Nerd Tutorials:

The BMP180 barometric sensor (model GY-68) is the one in the following figure (front and back view). It is a very small module with 1mm x 1.1mm (0.039in x 0.043in).
It measures the absolute pressure of the air around it. It has a measuring range from 300 to 1100hPa with an accuracy down to 0.02 hPa. It can also measure altitude and temperature.
The BMP180 barometric sensor communicates via I2C interface. This means that it communicates with the Arduino using just 2 pins.

Read more Here

 

More Articles to Read

Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)
Bridge Monitoring System using Wireless Sensor Network
Bridge Monitoring System using Wireless Sensor Network
An Arduino-powered automatic guitar footswitch
An Arduino-powered automatic guitar footswitch
These students created their own Overwatch VR rig
These students created their own Overwatch VR rig
Attachment is like a modern-day message in a bottle
Attachment is like a modern-day message in a bottle

Top




Shares