Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Digipeater hardware build video

Digipeater hardware build video

 

Kenneth Finnegan writes:

This is the hardware build of a new digipeater one of my friends asked me to put together for him. The transceiver is a GM300, with a KAM plus TNC modulating it. If we didn’t happen to have a KAM+ on hand, I would have probably used an OT3m from Argent Data.
He’ll provide the computer, but for testing I have it hooked up to a Qotom Q310G4 running Aprx.
As mentioned in the video, when I’m working with CAT5 cable, I love using the GreenLee 4908 toolkit.

Read more Here

 

More Articles to Read

#FreePCB via Twitter to 2 random RTs
#FreePCB via Twitter to 2 random RTs
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
Shirt Pocket Transceiver with the Si5351 and OLED
Shirt Pocket Transceiver with the Si5351 and OLED
All metal C930e webcam
All metal C930e webcam
The Soldering Tools That Make Your Life Easier
The Soldering Tools That Make Your Life Easier
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 c ...
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 cell Lithium ion battery protection
Synthesized Sidetone
Synthesized Sidetone

Top




Shares