Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

100W AF dummy load

100W AF dummy load
This is a quick post to showcase 100W 4 channel AF dummy load which we build to test the output stages of audio power amplifiers. This dummy load use 4, 8Ω 100W wire wound resistors which are available in eBay. In this unit all 4 resistors are mounted on 170mm × 40mm × 60mm high gauge aluminum heat sink.

Prototype version of 100W AF dummy load.

It costs LKR1200 to build this unit and most expensive component in this unit are wire wound resistors. At the time of writing this 100W resistor packs are available in eBay for USD $6.00.

 

More Articles to Read

Single-Sided USB Charger
Single-Sided USB Charger
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Replace a microwave’s beeping with the Windows XP startup sound
Replace a microwave’s beeping with the Windows XP startup sound
A DIY Laser Scanning Microscope
A DIY Laser Scanning Microscope
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
ESP8266 LED lighting: QuinLED v2.6 PCB
ESP8266 LED lighting: QuinLED v2.6 PCB
Switching LVDS Graphics in a Laptop Computer
Switching LVDS Graphics in a Laptop Computer
Teleknitting: TV-based string art
Teleknitting: TV-based string art
DIY Bubble Machine
DIY Bubble Machine
Start your day with Nerf target practice!
Start your day with Nerf target practice!
Teardown of a Peaktech 6225A
Teardown of a Peaktech 6225A

Top




Shares